Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Professional Camera Stabilization System, Dual Support Arm and Vest for use with HD-2000, HD-4000, XR-2000 or XR-4000
Model: X-10
Part #: GLX10
- Highly advanced, professional camera stabilization system designed for cameras weighing up to 6 pounds when used with the Glidecam 2000 Pro
- System will allow to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake
- Very similar in design to the Glidecam Smooth Shooter
- X-10 comes with a trimmable Arm-to-Vest Connector
- Dual-Articulating Support Arm incorporates 38 precision radial bearings within its machined T6 aluminum structure
Product Info
Tech Specs
Related Products
The GLIDECAM X-10 is a highly advanced, professional camera stabilization system designed for cameras weighing up to 6 pounds when used with the Glidecam 2000 Pro, or for Cameras weighing from 4 to 10 pounds when used with the Glidecam 4000 Pro. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake. The GLIDECAM X-10 is very similar in design to the Glidecam Smooth Shooter; however the X-10 comes with both sections of its support arm being able to move vertically, whereas the Smooth Shooter comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable Arm-to-Vest Connector, whereas the Smooth Shooter’s Arm-to-Vest Connector is not trimmable. The GLIDECAM X-10 system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The GLIDECAM X-10'S Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm that isolates your motions from the camera in a way that creates smooth camera footage. The GLIDECAM X-10 does not come with a Glidecam 2000 Pro or a Glidecam 4000 Pro; however, it is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the GLIDECAM X-10's Support Arm. Neither the Glidecam 2000 Pro, nor the 4000 Pro need to be modified to work with the GLIDECAM X-10. You can use your camcorder's flip out LCD monitor, or a monitor that is attached to the base of your Glidecam 2000 Pro or 4000 Pro. This allows for remote viewing of the camera's image without disturbing the orientation of the system. When using the Glidecam 2000 Pro or Glidecam 4000 Pro in hand-held mode, it is your arm that carries all of the weight. However, when the 2000 Pro or 4000 Pro are used with the GLIDECAM X-10, it is the GLIDECAM X-10's Spring-loaded Support Arms that carry all of the weight. Because of this, you will now be able to shoot for extended periods of time, whereas before, the stress associated with hand-holding the weight reduced your shooting time.
- Highly advanced, professional camera stabilization system designed for cameras weighing up to 6 pounds when used with the Glidecam 2000 Pro
- System will allow to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake
- Very similar in design to the Glidecam Smooth Shooter
- X-10 comes with a trimmable Arm-to-Vest Connector
- Dual-Articulating Support Arm incorporates 38 precision radial bearings within its machined T6 aluminum structure
- Inter-X-Change™ system makes the installation and removal of the springs quick and easy
- Arm can be setup and configured so either a left-handed, or a right-handed operator can use the system
- Dual Support Arm Boom Range: 30"
- Dual Support Arm Weight: 5 pounds 12 ounces in Two Spring Mode, without arm posts
- All measurements and weights are approximate
- Dual Support Arm Boom Range: 30 in
- Dual Support Arm Weight: 5 pounds 12 ounces in Two Spring Mode
- Individual Weight Plates: 12.9 oz
CAMCRANE 200
- CAMCRANE 200 Camera Crane System with Tripod Mounted and Boom-Arm, for cameras weighing up to 25 pounds
FOREARM BRACE
- Forearm Brace Camera Stabilization System for use with the HD-1000, HD-2000, HD-4000, XR-1000, XR-2000 or XR-4000
HD-2000
- Hand-held Camcorder Stabilizing System for Low Profile Cameras, weighing from 2 to 6 Pounds
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Central Ohio Audio Video
close
Central Ohio Audio Video
6650 Busch Blvd.
Columbus, OH 43229
USA
(614) 848-5222
http://www.centralohav.com/
Contact in regards to this product:
Glidecam Industries, Inc.
Model: X-10
Request more information from a dealer near you
close
Request more information from a dealer near you
FAQ
Can I return an item for credit?
Hours of Operation?
Private Policy, Personal Data, and Cookies
View More
Links
Contact Info
6650 Busch Blvd.
Columbus, OH 43229
Office: (877) 432-8273
Fax: (614) 848-6189