Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
328 to 760Wh Hypercine XAG Li-ion Block Battery for ARRI/Sony F65/RED/Panavision Cameras
Model: Hypercine XAG
- 14.4V and 28V Li-Ion Block battery
- Built in charger
- On/off Switch
- (2) 4p Xlr for 14.4V and (1) 3p Xlr for 28V provides dual simultaneous outputs (20A at 14.4V; 10A at 28V)
Product Info
Tech Specs
The new Hypercine X provides a "block" battery form factor with more compact design. The Hypercine X supports the film and digital cinema markets by offering both 14.4v and 28v power outputs. The Hypercine X was developed based on requests for an air travel friendly, Li-Ion, block battery solution. Leveraging our high-draw Hypercore battery technology, we’ve been able to provide a device which allows the user to place four brick battery packs within the device housing, transforming it into one single unit, while also offering simultaneous, built-in charging. With four HC8 batteries installed, the unit provides 340wh, in a super compact design. Keeping travel guidelines in mind, you may also use Hypercore Prime battery packs, increasing the maximum capacity to 760wh. Each battery pack is placed within a hopper style system, with locking panels, allowing you to transport the unit just as you would a block battery. With the battery packs installed, you can choose to use one the 14.4v 4-pin XLR outputs, or simultaneously the 14.4v output with the 28v 3-pin XLR output. When you’re done using the battery pack, supply the Hypercine with 100-240VAC via its AC in, and charge up the unit in as little as 2 hours. A large, multifunction backlit LCD is present on the front of the unit to provide cumulative data when in discharge modes, and isolated battery pack information when in charge mode.
A built-in 28v regulator insures that the proper power is provided, while incorporated low-voltage circuitry insures the battery packs within are well protected. The Hypercine is a travel friendly, light weight, modular system, powerful enough to provide extended runtime to cameras including ARRI, Sony F65, RED, Panavision, etc. The 28v output can also be used to power HMI, and heavy draw LED lights. Hypercine will only work with SMART battery packs and the four packs must be of equal capacity.
A built-in 28v regulator insures that the proper power is provided, while incorporated low-voltage circuitry insures the battery packs within are well protected. The Hypercine is a travel friendly, light weight, modular system, powerful enough to provide extended runtime to cameras including ARRI, Sony F65, RED, Panavision, etc. The 28v output can also be used to power HMI, and heavy draw LED lights. Hypercine will only work with SMART battery packs and the four packs must be of equal capacity.
- 14.4V and 28V Li-Ion Block battery
- Built in charger
- On/off Switch
- (2) 4p Xlr for 14.4V and (1) 3p Xlr for 28V provides dual simultaneous outputs (20A at 14.4V; 10A at 28V)
- Depth: 6.13 in
- Height: 7.56 in
- Width: 10.63 in
- Product Weight: 18.20 lbs
- Warranty (Length/Type): 1.5 Year
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Central Ohio Audio Video
close
Central Ohio Audio Video
6650 Busch Blvd.
Columbus, OH 43229
USA
(614) 848-5222
http://www.centralohav.com/
Contact in regards to this product:
Core SWX
Model: Hypercine XAG
Request more information from a dealer near you
close
Request more information from a dealer near you
FAQ
Can I return an item for credit?
Hours of Operation?
Private Policy, Personal Data, and Cookies
View More
Links
Contact Info
6650 Busch Blvd.
Columbus, OH 43229
Office: (877) 432-8273
Fax: (614) 848-6189