Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Studio Condenser Microphone
Model: SCM-1000
- Large, pressure-gradient condenser, gold-sputtered diaphragm and FET preamplifier
- Internal shockmount construction for the highest structural integrity and rugged reliability
- Selectable 10dB attenuation pad and low-cut filter
- Multiple selectable polar patterns Omni/Cardioid/Figure 8
- Requires 48V phantom power
Product Info
Tech Specs
Documents
Accessories
Microphone offers transformer less output and true condenser design (element constantly biased by the pre-amp) for exceptionally low self noise and increased dynamic range, enhanced low and high end response with improved linearity across the frequency range and maximum SPL capacity. It features a large dual diaphragm capsule (1.1 inch) and selectable low cut filter, 10dB attenuation pad and 3 polar patterns omni, cardioid. The capsule is hand tooled from brass and features a 3-micron gold-evaporated on Mylar diaphragm for maximum sensitivity, long life, detail and tone. The capsule also utilizes a specially designed gold-plated center-terminated element, which creates a gentle extension of the top octaves and enhanced-accuracy transient response. It uses a carefully selected Field Effect Transistor (FET), specially chosen for its low distortion and superior signal-to-noise ratio.
- Large, pressure-gradient condenser, gold-sputtered diaphragm and FET preamplifier
- Internal shockmount construction for the highest structural integrity and rugged reliability
- Selectable 10dB attenuation pad and low-cut filter
- Multiple selectable polar patterns Omni/Cardioid/Figure 8
- Requires 48V phantom power
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum SPL (Sound Pressure Level): 134 dB
- Signal to Noise Ratio: 76 dB
- Depth: 6.50 in
- Product Weight: 0.93 lbs
- Type: True condenser pressure-gradient microphone with 1.1 inch diaphragm and FET pre-amplifier
- Rated output impedance: < 200 ohms
- Recommend Load Impedance: >1000 ohms
- Equivalent noise level to DIN 45405(CCIR468-2): 26 dB
- IEC 268-4(A weighted): 18 dBA
- Power Requirement: +48 VDC ( phantom power)
- Current Consumption: <3 mA
- Ambient Temperature Range: 14 to 140 °F (-10°C to +60°C)
- Relative humidity range: 90%(68°F, 20°C), 85%(140°F, 60°C)
- Connector: 3-pin XLR (gold plated)
- Diameter: 2.10 in (55mm)
Microphone
92 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Central Ohio Audio Video
close
Central Ohio Audio Video
6650 Busch Blvd.
Columbus, OH 43229
USA
(614) 848-5222
http://www.centralohav.com/
Contact in regards to this product:
Nady Systems, Inc. - Pro Audio
Model: SCM-1000
Request more information from a dealer near you
close
Request more information from a dealer near you
FAQ
Can I return an item for credit?
Hours of Operation?
Private Policy, Personal Data, and Cookies
View More
Links
Contact Info
6650 Busch Blvd.
Columbus, OH 43229
Office: (877) 432-8273
Fax: (614) 848-6189