Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Vocal/Instrument Condenser Microphone, External Low-cut Switch
Model: SPC-10
- FET circuitry for superior audio with unsurpassed warmth and transparency
- External low-cut switch for rolling off low frequencies
- Multi-axis internal capsule shockmount for extremely low handling noise
- Tight cardioid pattern for optimum feedback rejection
- Required 48Vdc phantom power
Product Info
Tech Specs
Related Products
Documents
Accessories
Vocal/instrument condenser microphone with external low-cut switch. Large (1-inch) diameter, ultra-thin membrane, gold-evaporated, pressure gradient condenser capsule and transformerless. FET circuitry for superior audio with unsurpassed warmth and transparency. Linear frequency response across entire audio spectrum (30 to 20,000Hz), with added presence in the mids and highs for crisp, clear sound. Superior 8mV/Pa sensitivity, wide 122dB dynamic range, high 140dB SPL capacity and ultra-low distortion. External low-cut switch for rolling off low frequencies (80Hz, 12 dB/octave). Multi-axis internal capsule shockmount for extremely low handling noise. Tight cardioid pattern for optimum feedback rejection. Required 48Vdc phantom power.
- FET circuitry for superior audio with unsurpassed warmth and transparency
- External low-cut switch for rolling off low frequencies
- Multi-axis internal capsule shockmount for extremely low handling noise
- Tight cardioid pattern for optimum feedback rejection
- Required 48Vdc phantom power
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Condenser
- Microphone Connectivity - Wired
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 30 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Dynamic Range: 122 dB
- Impedance: 200 ohm
- Maximum SPL (Sound Pressure Level): 140 dB
- Signal to Noise Ratio: 76 dB
- Wireless: No
- Product Weight: 0.71 lbs
- Sensitivity: 8mV/Pa (at 1kHz, 74dB SPL)
- Minimum Load Impedance: 1000 ohms
- Equivalent Noise Level: 18dB (A weighted IEC/DIN651)
- Connector: 3-pin XLR (gold plated)
- Phantom Power: +48V, 2.7mA
- Mic cable: 3-pin XLR standard cable
- Dimensions: 2.1 x 7.1 inch
- Materials: die-cast zinc, steel mesh ballscreen
SPC-15
- Vocal/Instrument Condenser Microphone, Gold-plated XLR Connector
Vocal/Instrument Condenser Microphone
101 kb
- Other
BFC-12
Butterfly Microphone Clip
CWS-1
Microphone Windscreen, Red, Yellow, Orange, Blue, Gray and Black
MB-6
Soft 6-space Microphone Bag
MST-5B
Boom Microphone Stand with Tripod Base
SKX-1620
20’ 16-cable XLR Male to XLR Female Snake Cable
XC
6 to 100’ XLR to XLR microphone cable
XLC
22-gauge Dual Conductor Microphone Cable
Butterfly Microphone Clip
CWS-1
Microphone Windscreen, Red, Yellow, Orange, Blue, Gray and Black
MB-6
Soft 6-space Microphone Bag
MST-5B
Boom Microphone Stand with Tripod Base
SKX-1620
20’ 16-cable XLR Male to XLR Female Snake Cable
XC
6 to 100’ XLR to XLR microphone cable
XLC
22-gauge Dual Conductor Microphone Cable
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Central Ohio Audio Video
close
Central Ohio Audio Video
6650 Busch Blvd.
Columbus, OH 43229
USA
(614) 848-5222
http://www.centralohav.com/
Contact in regards to this product:
Nady Systems, Inc. - Pro Audio
Model: SPC-10
Request more information from a dealer near you
close
Request more information from a dealer near you
FAQ
Can I return an item for credit?
Hours of Operation?
Private Policy, Personal Data, and Cookies
View More
Links
Contact Info
6650 Busch Blvd.
Columbus, OH 43229
Office: (877) 432-8273
Fax: (614) 848-6189