Microphones : Instrument Microphones : Audio-Technica U.S., Inc. - AT4053b

End-address hypercardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)

Series: 40

Model: AT4053b

Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS). The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).

Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Hypercardiod
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 129 dB
Impedance: 50 ohm
Maximum SPL (Sound Pressure Level): 155 dB
Sensitivity: -34 dB
Signal to Noise Ratio: 78 dB
Wireless: No
Current Draw: 0 Amps
DC Voltage: 48 Volts
Product Weight: 0.28 lbs
Noise: 16 dB
Warranty (Length/Type): Five-Year/Limited End-User
Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") diameter
ROHS Compliant: Yes

AT4021 - End-address cardioid condenser microphone (Fixed-charge back plate, permanently polarized)

AT4022 - End-address omnidirectional condenser microphone for instruments (freq. response: 20-20,000 Hz

AT4040 - Side-address cardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)

AT4050ST - Stereo Condenser Microphone (20-18,000 Hz frequency response)

AT4051b - End-address cardioid condenser microphone (externally polarized)

AT4053b Submittal Sheet 371 kb - Data Sheet

Project List

End-address hypercardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)

Series: 40

Model: AT4053b

Suggested Products

FAQ

What is our warranty policy?

Can I return an item for credit?

Hours of Operation?

Private Policy, Personal Data, and Cookies

View More

Links

Contact Info